Our company supplies pipes with your order sizes.
We are usually able to cut pipes with tolerance of about±0.1 if the OD sizes are within 1 mm-30mm. Other sizes are available. We can change the cutting process for applications and quantity of small or large depends on your order. You can freely ask about the way of cutting face treatment, such as splinter cleaning or inner edge cutting out or outer edge cutting out. There are many kinds of cutting process. We suggest the best cutting process for the customers considering the applications, quantity, and cost If your order is large, we can use machine cutting. If your order is cutting one piece, we will do hand cut.
Cutting #1
reamer
Cutting #2
barrel
Cutting #3
metal removal machining, thread rolling
Cutting #4
metal removal machining, thread rolling
Cutting #5
screw cutter
Cutting #6
screw cutter
* Click for enlargement
We are available to bend pipes with the wall thickness range from 0.5mm to 30mm OD. Other size pipes are also available. We choose the best setting tools for bending for customer specialization.
Q and A from customers
Q : Customer request A : Our opinion
- Q：This is the bending offer. There is no straight part to grasp or pinch, so the customer has difficulties to bend the pipes.
A：It is needed to make the straight part so that the machines are able to grasp. After bending, the straight part is cut.
- Q：Customer needs the perfect circle of ID.
A：We inset the some bar into the pipes to prevent yielded of bending part.
- Q：Order 100pcs only never repeat.
A：We do not make new setting tool. We use existing set to make this order. It became cheaper.
As you see above, there are several processes for Bending, so, we choose the appropriate bending process and price.
Bending #1
Bending #1
Bending #2
Bending #2
Bending #3
Bending #3
Bending #4
Bending #4
Bending #5
Bending #5
* Click for enlargement
These are the finishing processes. One way is which is using whetstone to get rid of splinters of steels and is smoothing the surface of products.
The other way is the shot blast. This is also used to smooth the surface of products and to get rid of splinters shooting media such as sand. We coordinate choice of whetstone and time schedules using our experiments, so it is available to make cost down and high quality products.
Finishing 'after'
Finishing 'after'
Finishing 'before'
Finishing 'before'
* Click for enlargement
It is used sensor protection.
Swage #1
Swage #1
Swage #2
Swage #2
* Click for enlargement
Not only the material matters but also applications and cost performance, we suggest the way of welding processes.
Welding #1
Welding #1
Welding #2
Welding #2
Welding #3
Welding #3
Welding #4
Welding #4
Welding #5
Welding #5
* Click for enlargement
In the case of short pipes, we use plate not the material pipe using pressing machine.
Stainless and copper as pipe materials are in common.
Press #1
Press #1
Press #2
Press #2
Press #3
Press #3
Press #4
Press #4
Press #5
Press #5
Press #6
Press #6
Press #7
Press #7
Press #8
Press #8
* Click for enlargement
Japanese high quality
